| Brand： | ebmpapst |
| Part No： | K3G250-PR17-W9 |
| Fan Type： | Centrifugal Fan |
| Rated Voltage(V)： | 400 |
| Size(mm)： | 250 |
| Max.Air Flow(m³/h)： | 2405 |
| Max.Pressure(Pa)： | N/A |
| Input Power(W)： | 1160 |
| Speed(rpm)： | 4000 |
| Noise(db)： | N/A |
Parameter Analysis
Rated voltage: The rated voltage is 400V, which is a common standard voltage in the industrial field. The 400V rated voltage design enables the K3G250-PR17-W9 fan to seamlessly connect with most industrial power systems without the need for additional voltage conversion equipment, reducing installation costs and system complexity. At the same time, the stable 400V power supply ensures the reliability and stability of the fan during operation.
Dimensions: The overall size of the fan is 250 mm, which is a relatively compact design. This compact size makes the fan have low space requirements during installation and is suitable for various places with limited space. Whether it is installed inside a small device or in a ventilation duct system, it can easily adapt to save valuable space resources for users.
Maximum air volume: The maximum air volume can reach 2405m³/h. Although its air volume may not be particularly large compared to some large fans, it can provide sufficient ventilation capacity in its applicable scenarios. For some small workshops, laboratories, commercial shops and other places, this fan can quickly and effectively realize air circulation and ventilation, and improve indoor air quality.
Input power: The input power is 1160W, which shows good energy-saving performance while ensuring a certain air volume output. Lower input power means that in the long-term operation process, it can save a lot of energy costs for users. Compared with fans of the same type and air volume, the K3G250-PR17-W9 fan has obvious advantages in energy consumption.
Speed: The fan speed is 4000rpm, and the higher speed is one of the key factors to achieve its ventilation capacity. The high-speed rotating impeller can quickly inhale and discharge air, thereby generating a large air volume. At the same time, precise speed control ensures the stability and reliability of the fan, reducing failures and noise caused by speed fluctuations.
Design highlights
Aerodynamic optimization: The impeller is the core component of the centrifugal fan. The impeller of the K3G250-PR17-W9 fan adopts advanced aerodynamic design. The shape and angle of the blades are carefully calculated and optimized, so that the air can flow smoothly when passing through the impeller, reducing the resistance of the airflow and energy loss. This design not only improves the ventilation efficiency of the fan, but also reduces the noise level when the fan is running, creating a quiet working environment for users.
Selection of high-quality materials: During the manufacturing process, the fan uses high-quality materials. The impeller is made of high-strength, lightweight alloy material with good corrosion resistance and wear resistance. This material not only ensures the strength and rigidity of the impeller, but also reduces its own weight, reduces the load on the motor, and improves energy utilization efficiency. The casing of the fan is made of high-quality metal materials. After a special treatment process, it has good protection performance and can be used for a long time under harsh environmental conditions.
Compact structure design: The structural design of the entire fan is compact and reasonable, and the layout between the various components is carefully planned. The connection method between the motor and the impeller is optimized to ensure efficient power transmission and reduce energy loss. At the same time, the compact structure is also easy to install and maintain, reducing the user's use cost.
Performance advantages
Efficient ventilation: With its optimized aerodynamic design and high speed, the K3G250-PR17-W9 fan can achieve rapid air circulation and ventilation in a short time. In its applicable scenarios, it can quickly discharge the dirty air in the room, introduce fresh air, improve the indoor air quality, and provide personnel with a comfortable and healthy working and living environment.
Stable and reliable: EBM-PAPST's exquisite craftsmanship and strict quality control system ensure the stability and reliability of the fan. After a long period of operation testing and practical application verification, the fan can operate stably under various complex environmental conditions, reduce the probability of failure, and provide users with continuous and reliable ventilation services.
Energy saving and consumption reduction: The lower input power and high energy conversion efficiency enable the fan to significantly reduce energy consumption during operation. With the increasing energy costs today, this advantage brings real economic benefits to users, and it is also in line with the development trend of environmental protection and energy saving.
Application scenario analysis
Industrial field: In some small industrial workshops, such as electronic assembly workshops, plastic product processing workshops, etc., a certain amount of heat, dust and exhaust gas will be generated. K3G250-PR17-W9 fans can be installed in ventilation systems to discharge these pollutants outdoors in time, ensuring the air quality in the workshop and the normal operation of production equipment. At the same time, for some industrial production processes with high requirements for temperature and humidity, the fan can cooperate with air conditioning equipment to realize air circulation and regulation to ensure the stability of the production environment.
Commercial field: In small commercial shops, cafes, barber shops and other places, the flow of people is relatively small, but a good ventilation environment is also required. K3G250-PR17-W9 fans can be installed in ventilation ducts to provide these places with sufficient fresh air, improve the indoor environment and increase customer satisfaction. In commercial kitchens, the fan can quickly exhaust oil smoke and odors to keep the kitchen air fresh.
Laboratory field: Various chemical experiments and research work are usually carried out in laboratories, which will produce some harmful gases and odors. K3G250-PR17-W9 fans can be installed in the laboratory's fume hood or ventilation system to discharge these harmful gases outdoors in time to protect the health of the experimenters. At the same time, a stable ventilation environment also helps to ensure the accuracy of the experimental results.
The K3G250-PR17-W9 fan has become an ideal choice in the field of ventilation with its excellent performance, advanced design and wide range of application scenarios. Whether in industrial production, commercial operations or laboratory research, this fan can give full play to its advantages and provide users with efficient, stable and reliable ventilation solutions. With the continuous growth of market demand and the continuous advancement of technology, I believe that this fan will show its unique value in more fields.
